ABI Error Message

834:	ADD INVALID - BROKER REF MISMATCH

IF AN ENTRY SUMMARY RECORD EXISTS AND AN ADD TRANSACTION IS SUBMITTED VIA BATCH ABI INPUT, THE BROKER REFERENCE NUMBER IN THE EXISTING RECORD MUST MATCH THE BROKER REFERENCE NUMBER IN THE '20' RECORD OF THE BATCH ADD TRANSACTION. FILERS MAY CHANGE THEIR FILER REFERENCE NUMBER IF THEY USE ACTION CODE OF "R" (REPLACE) OR "C" (CHANGE) IN LIEU OF "A" (ADD). THIS MESSAGE WILL ALSO RESULT IF THE CARGO DATA INPUT APPLICATION (HI) OR THE BORDER CARGO RELEASE APPLICATION (HN) IS USED AND THE "A" ACTION CODE IS TRANSMITTED WITH A DIFFERENT BROKER REFERENCE NUMBER THAN WAS USED ON THE INITIAL INPUT.

RB4:	EXCESS/INVALID FEE COUNT

FOR RECONCILIATION, THE 'R20' ABI INPUT RECORD FEE COUNT IS EITHER NOT NUMERIC (INVALID) OR > 10 (EXCESS). IN OTHER WORDS, POS 78-79 OF THE R20 RECORD MUST SHOW A NUMERIC FIGURE WHICH EQUALS THE NUMBER OF FOLLOWING R21 RECORDS. IF ONE R21 RECORD FOLLOWS THE R20 RECORD, POS 78-79 WOULD BE "01", E.G. IF THE FILER SPACE FILLS THIS ELEMENT BUT TRANSMITS AN R21 RECORD, THIS MESSAGE WILL RESULT (THE 'INVALID' PART OF THE NARRATIVE). IF THE FILER TRANSMITS A FIGURE GREATER THAN '10', THIS MESSAGE WILL ALSO RESULT (THE 'EXCESS' PART OF THE MESSAGE). NOTE: IF THE ENTRY IS AN AGGREGATE RECON, AND NO R21 RECORDS ARE TRANSMITTED, THE FILER MUST STILL SHOW '00' IN POS 78-79 OF EACH R20 RECORD.

42B:	LINE RELEASE ENTRY ON FILE

THIS ERROR MESSAGE OCCURS IN THE "REVISED FILER DATE" (DN) TRANSACTION WHEN A FILER TRANSMITS A REVISED ENTRY DATE IN THE DN01 RECORD, POSITIONS 19-24,WHEN THE ENTRY HAS BEEN RELEASED VIA LINE RELEASE. LINE RELEASE SETS THE ENTRY DATE AND CANNOT BE REVISED.

4KQ:	CERTIFICATE NUMBER NOT REQUIRED

THE COTTON EXEMPTION NUMBER IS SENT IN POSITIONS 48-56 OF THE 51 RECORD. THIS MESSAGE OCCURS WHEN AN EXEMPTION CERTIFICATE NUMBER IS SENT FOR A TARIFF NUMBER ON A LINE WHEN IT DOES NOT REQUIRE IT.

AFI:	DUMPING PYBL AMT INVALID;35 RECOR

THE PAYABLE ANTIDUMPING DUTY AMOUNT TRANSMITTED IN REC 35, POS 15-25 DOES NOT EQUAL THE SUM OF THE ANTIDUMPING LINE ITEM AMOUNTS TRANSMITTED IN REC(S) 60POS 33-42.

VKY:	HLT;POS REQUIRED W/ OPTIONAL LEN

A POSITION VALUE MUST BE SPECIFIED FOR THE OPTIONAL POSITION/LENGTH PARAMETER WHEN A LENGTH IS SPECIFIED.

DLB:	WARNING - WPN REVOKED, CHK PRIVS

THIS MESSAGE OCCURS IN THE AUTOMATED DRAWBACK MODULE. THIS MESSAGE IS A 'WARNING' THAT APPEARS IF THE CLAIMANT IS CURRENTLY IN THE PRIVILEGE FILE SHOWING THAT THE WAIVER OF PRIOR NOTICE IS REVOKED. CLAIMANTS HAVE UNTIL 4/6/1999 TO RE-APPLY FOR PRIVILEGES. MESSAGE DLB WILL BECOME A FATAL ERROR ON OR AFTER 4/6/1999.

EJI:	NO. OF SHIPPING/PACKING UNITS REQ

THIS MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSMISSION (APPLICATION CI). THE NUMBER OF EXTERIOR SHIPPING UNITS MUST BE REPORTED (FOR CONTAINERIZED CARGO) IN THE C5 REC, POS 4-18.IF THIS FIELD IS BLANK OR REFLECTS A ZERO QUANTITY, THIS ERROR MESSAGE WILL BE GENERATED. THIS MESSAGE ALSO APPLIES TO THE C47 RECORD.

VOH:	PREPARER/REMOTE IND CONLICT

THE REMOTE PROCESSING DISTRICT PORT IS SENT IN THE 'B' RECORD, POSITIONS 47-50. THE REMOTE PREPARER FILER IS SENT IN THE 'B' RECORD, POSITIONS 51-53. IF THE REMOTE PREPARER INDICATOR IN POSITION 56 OF THE 'B' RECORD IS SET TO '1' (YES) THEN THE DDPP/FILER MUST BE SET UP IN THE ABI BROKER REMOTE FILING LOCATIONS FILE.

VH9:	DT HS7: VIN LIST DUP POSITION: 2

IF THE FILER REPORTS DOT INFORMATION VIA THE DT03 RECORD AND THE DATA IS INCLUDED IN AN ENTRY SUMMARY INPUT TRANSACTION, THERE ARE FOUR POSITIONS AVAILABLE IN THE DT03 RECORD TO REPORT UP TO FOUR VEHICLE IDENTIFICATION NUMBERS (VIN). IF THE VIN REPORTED IN POSITIONS 5-21 (FIRST VIN FIELD) IS DUPLICATED IN POSITIONS 22-38, THIS ERROR MESSAGE WILL BE GENERATED.

EJV:	INBOX IND MUST BE 'R' OR SPACE

THIS ERROR MESSAGE IS GENERATED IN RESPONSE TO AN AUTOMATED INVOICE TRANSACTION (APPLICATION CI). THE C01 REC, POS 56, PROVIDES THE FILER AN OPPORTUNITY TO INDICATE IF THE INVOICE BEING TRANSMITTED IS AN INITIAL INPUT (SPACE FILL THE POSITION) OR IS IN RESPONSE TO AN ABI REJECTION FROM CUSTOMS WHICH REQUESTED THE TRANSMISSION OF THE INSTANT INVOICE. IN THE LATTER CASE, THE ACCEPTABLE VALUE FOR THIS FIELD IS "R". ANY OTHER CHARACTER TRANSMITTED IN THIS FIELD WILL GENERATE THIS ERROR MESSAGE.

APN:	VOIDANCE REQST NOT VALID

A REQUEST FOR VOIDANCE OF DENIAL, INDICATED BY 'R', MAY BE SUBMITTED WITHIN 90 DAYS AFTER PROTEST HAS BEEN DENIED BY CUSTOMS. THE VOIDANCE REQUEST INDICATOR IS ALREADY SET AT 'R' (AFFIRMATIVE FOR REQUEST), OR THE PROTEST IS NOT IN DENIED STATUS.

2BU:	INVALID STATE CODE

ACS REQUIRES THE ABI FILER TO REPORT THE STATE OF ULTIMATE DESTINATION FOR THE IMPORTED CARGO. THIS CODE IS TRANSMITTED IN THE 10 REC, POS 78-79. ONLY THE TWO CHARACTER POSTAL ABBREVIATION FOR ONE OF THE 50 STATES WILL BE ACCEPTED IN THIS ELEMENT. IF ANY OTHER CODE IS TRANSMITTED, THIS ERROR MESSAGE WILL BE GENERATED. IF THE ADD 5106 APPLICATION (CODE TI) IS USED, THIS ERROR MESSAGE WILL BE GENERATED IF THE STATE CODE IS NOT ONE OF THOSE APPROVED BY THE UNITED STATES POSTAL SERVICE. NOTE THAT ERROR MESSAGE 2B8 IS IDENTICAL TO THIS ERROR MESSAGE AND MAY BE THE ONE BEING CALLED FOR 5106 INPUT ERRORS. THAT APPLICATIION IS NOT RETURNING ERROR CODES AS OF MAY 1998.

"4FR:

HTS REQUIRES FORMAL ENTRY

THIS MESSAGE IS GENERATED IN RESPONSE TO AN ABI QUOTA QUERY INPUT. IF THE CATEGORY AND COUNTRY IDENTIFIED BY THE TRANSMITTING FILER DO NOT RESULT IN A MATCH OF VISA FILES IN ACS, THIS MESSAGE WILL BE SENT TO THE FILER AS A RESPONSE

VPQ:	EXPORT DT MUST BE > 12/31/95

THIS ERROR MESSAGE OCCURS IN THE NAFTA DUTY DEFERRAL MODULE. THE EXPORT DATE IS SENT IN THE D01 RECORD, POSITIONS 22-27. IN THIS MODULE THE EXPORT DATE MUST BE GREATER THAN DECEMBER 31, 1995.

BRQ:	EARLIEST IMPORT DATE MISMATCH

WHEN THE RECONCILIATION SUMMARY ISSUE CODE ON THE 'RA' TRANSACTION 'R10' RECORD = 'NF', THE EARLIEST IMPORT DATE MUST BE GIVEN AND MUST MATCH THE EARLIEST IMPORT DATE IN ACS OF ANY OF THE ASSOCIATED IMPORTS GIVEN IN THE 'R20' RECORDS.

29F:	"Y" RECORD MISSING OR INVALID

THIS MESSAGE INDICATES THAT THE "Y" RECORD IS MISSING FROM THE INPUT TRANSACTION. THE ERROR MESSAGE DOES NOT USUALLY DISPLAY WHEN THIS ERROR OCCURS.

LU3:	LUMBER PERMIT NOT ALLOWED

THE SOFTWOOD LUMBER AGREEMENT BETWEEN CANADA AND THE UNITED STATES REQUIRES A SOFTWOOD LUMBER PERMIT NUMBER FOR LUMBER MILL PRODUCTS CLASSIFIED IN SUBHEADINGS 4407.10.00, 4409.10.10, 4409.10.20 AND 4409.10.90 THAT WERE "FIRST MANUFACTURED" INTO A PRODUCT IN THE CANADIAN PROVINCES OF XO, XQ, XC OR XA. THE LUMBER PRODUCT MUST MEET BOTH CRITERIA, TARIFF NUMBER AND PROVINCE. THE LUMBER PERMIT NUMBER IS SENT IN POSITIONS 57-65 OF THE 51 RECORD.THIS MESSAGE OCCURS WHEN A LUMBER PERMIT NUMBER IS SENT FOR A TARIFF NUMBER THAT IS NOT IN THE ABOVE NAMED SUBHEADINGS OR FOR A TARIFF NUMBER IN THE SUBHEADINGS BUT NOT FROM ONE OF THE FOUR NAMED PROVINCES. THE ERROR MESSAGE IS SENT WITH THE 50 RECORD NOT THE 51 RECORD.

BRX:	EARLIEST IMPRT DATE MUST = SPACES

RECONCILIATION: WHEN THE R10 ISSUE CODE IS NOT = 'NF', THE R10 EARLIEST IMP DATE MUST = SPACES.

VGA:	FD701: INV LINE#/SEQ

THIS ERROR MESSAGE RESULTS WHEN A FILER SENDS AN FDA CORRECTION (CP TRANSACTION) TO RESPOND TO AN FDA DT REJECT MESSAGE AND THE CUSTOMS LINES THAT THEY ARE SENDING IN THE FDA CORRECTION DO NOT MATCH THE EXACT SEQUENCE OF LINES IN THE SELECTIVITY RECORD. WHEN A CORRECTION IS DONE, THE FILER MUST SEND THE CUSTOMS LINES (WITH THE CORRESPONDING FDA DATA OR DISCLAIM AS APPLICABLE) IN THE EXACT ORDER AS IT APPEARS ON THE SELECTIVITY LINE ITEM SCREEN. THE FILER MUST ALSO SEND ALL CUSTOMS LINES WHETHER OR NOT THEY ARE FDA REGULATED. CHECK THE ORDER OF THE TARIFF NUMBERS IN THE CP SEND AGAINST THE SELECTIVITY LINE ITEM SCREEN. THEY MUST MATCH EXACTLY. THIS MESSAGE ALSO RESULTS WHEN A FILER ATTEMPS TO START A FDA LINE NUMBER WITHIN A CUSTOMS LINE WITH A NUMBER OTHER THAN 001. THE MOST COMMON OCCURANCE IS WHEN CUSTOMS LINE 001 IS SENT AND, FOR EXAMPLE FDA LINES 001 AND 002 ARE SENT WITH IT. THEN THE FILER SENDS CUSTOMS LINE 002 AND STARTS THE FDA LINE NUMBERING WITH 003. THIS REJECT WILL ALSO OCCUR IF THE FILER SENDS BOTH AN FD0 (DISCLAIM) AND FDA DATA FOR THE SAME CUSTOMS LINE ON AN ENTRY SUMMARY INPUT TRANSACTION.

0DJ:	PRESENT DATE < ARRIVAL DATE

THIS MESSAGE IS GENERATED IN RESPONSE TO A CARGO RELEASE DATA INPUT TRANSACTION (APPLICATION HI). IF THE DATE OF PRESENTATION IS ELECTED AS THE ENTRY DATE, A "P" IS TRANSMITTED IN POS 23 OF THE H2 RECORD. SIMULTANEOUSLY, THE FILER MUST SEND A "PRESENTATION DATE" IN POS 50-55 OF THE H1 RECORD. THIS DATE CANNOT BE PRIOR TO THE ESTIMATED ARRIVAL DATE, TRANSMITTED IN POS 34-39 OF THE H1 RECORD. IF IT IS, THIS ERROR WILL BE GENERATED.

77H:	NO ULT CONS RECORD FOR ENTRY

NO ULTIMATE CONSIGNEE WAS TRANSMITTED WITH THE ENTRY (EITHER HN OR HI). WHEN ACS CHECKED THE ULTIMATE CONSIGNEE (UC) NAME AND ADDRESS FILE FOR THE ENTRY NUMBER, (OR ENTRY AND LINE NUMBER IF THERE WERE MULTIPLE UC'S) NONE WAS FOUND. THERE ARE TWO POSSIBLE RESOLUTIONS. THE FIRST IS FOR THE FILER TO TRANSMIT A VALID REGULAR OR ENCRYPTED UC NUMBER IN THE ENTRY ITSELF. THE SECOND IS FOR THE FILER TO TRANSMIT THE UC NAME AND ADDRESS (IJ) RECORD THAT REFERENCES THE ENTRY (AND LINE NUMBER IF APPROPRIATE). AFTER RECEIVING THE "DATA ADDED AS REQUESTED" REPLY, THE FILER SHOULD RE-TRANSMIT THE ENTRY.

AEY:	42 SENT; NOT REQUIRED

IN THE AUTOMATED INVOICE INTERFACE PROGRAM THIS ERROR MESSAGE WILL OCCUR IF AUTOMATED FILER SENDS A 42 INVOICE RECORD WITHOUT AN "E" (ELECTRONIC INVOICE INDICATOR) IN POSITION 56 OF THE 10 RECORD. IF THE FILER SENDS THE "E" THEY MUST SEND THE 42 RECORD.

VHH:	DT HS7: INVALID ISO CODE

IF THE FILER TRANSMITS DOT INFORMATION FOR BOX 05, 06, OR 12, THE ISO CODE OF THE COUNTRY OF ORIGIN IS REQUIRED. IF A CODE NOT FOUND ON THE COUNTRY CODE FILE IS TRANSMITTED IN POSITIONS 30-31 OF THE DT01 RECORD, THIS ERROR MESSAGE WILL BE GENERATED.

VEK:	FC 740:MODEL/TYPE NBR REQ

A MODEL OR TYPE NUMBER CODE IS REQUIRED TO BE SENT IN THE FC01 RECORD, POSITIONS 58-74.

 Next 10 >>Showing results 1 to 25 of 1405